windows xp tweaks

Services to turn off:
Alerter
Application Management
Automatic Updates
ClipBook
Distributed Link Tracking Client
Error Reporting Service
Fast User Switching Compatibility
Messenger
Portable Media Serial Number Service
Remote Registry
Routing and Remote Access
Task Scheduler
Telnet
TPC/IP NetBIOS Helper
Uninterruptible Power Supply


Change "Recycle Bin" size to 1%


Registry Hacks:

Auto Sort Start Menu
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\MenuOrder
Go to Edit/Permissions, click Advanced, clear the "Inherit From Parent" check box, click Copy from the dialog box, click OK and then clear the "Full Control" for your account and now Windows will autp sort the start menu, but you can still do it too

Disable User Tracking
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
Add or Edit DWORD = NoInstrumentation, Value = 1
Disables Windows user tracking; better performance, much better privacy

Cache Thumbnails
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced
Add or Edit DWORD = DisableThumbnailCache, Value = 1
Disables thumbnails in Windows, saving hard drive space

Kill Chrashed Apps Quicker
HKEY_CURRENT_USER\Control Panel\Desktop
Add or Edit Sring = HungAppTimeout, Value = 1000-5000
Cuts time for Windows to recongize a crashed application and allow you to kill it; default is 5000(for 5 seconds)

Faster Start Menu
HKEY_CURRENT_USER\Control Panel\Desktop
Add or Edit Sring = MenuShowDelay, Value = 0 - 400
Changes the delay that for Windows to show a menu in the start menu; value is in ms

Network Intelligently
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
Add or Edit String = DisableTaskOffload, Value = 1
Frees processor from doing network-card work

Browse the Network Faster
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\RemoteComputer\NameSpace
Delete subkeys {2227A280-3AEA-1069-A2DE-08002B30309D} and {D6277990-4C6A-11CF-8D87-00AA0060F5BF}
Speeds up network browsing of old Windows machines on the LAN by ignoring their scheduled tasks and printers


Remove Compression Option In Disk Cleanup
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\VolumeCaches\Compress old files
Delete the Default Value Key and the next time you start Disk Cleanup, it will skip the compression analyisis

Mastering The Windows XP Registry

Mastering The Windows XP Registry

The Recovery Console
The Windows XP Recovery Console is a tool that allows recovery from a number of failures. Previously, all you could do was boot another copy of Windows XP and hack your way around, replacing files, even registry components, in the blind hope that you would somehow fix the problem.
With Windows XP, you have two tools to use: the Recovery Console and the Safe Mode feature.
The Recovery Console is a powerful, simple (no, that's not an oxymoron!) feature that is supplied with Windows XP, but it is not installed by default. The Windows XP Safe Mode works in the same manner as the Safe Mode found in other versions of Windows. You can modify a number of system settings using Safe Mode (such as video modes). Installing the Recovery Console after the system has failed is quite like locking the barn door
after the horse has been stolen—it really won't work that well.

Installing the Recovery Console
The Recovery Console must be installed before disaster strikes. It will be difficult (maybe even impossible) to install it after a disaster has reared its ugly head. So, let's install the Recovery Console right now.

First, you must use the Windows XP distribution CD (or share containing the appropriate files, if installing from a network device). The Recovery Console is installed using the winnt32.exe program. The winnt32.exe program is the same program that is used to install Windows XP; however, by selecting the correct option, you are able to tell winnt32.exe to not install Windows XP, but to install the Recovery Console instead.

Note It is not possible to install the Recovery Console at the same time as Windows XP. You must first install Windows XP, then install the Recovery Console. If you have multiple copies of Windows XP installed, it is only necessary to install the Recovery Console one time—the Recovery Console will work with as many copies of Windows XP as are
installed.

Follow these steps to install the Recovery Console from the Windows XP distribution CD:
1. Insert the distribution CD and change into the i386 directory.
2. Run winnt32.exe using the /cmdcons option. Typically, no other options are needed, though some users may wish to specify source options, especially if installing from a network share rather than a hard drive.
3. The installation program contacts Microsoft to check for updates to this Windows XP component.

Figure 2.3: Windows XP's Dynamic Update uses the Internet to retrieve the latest files directly from Microsoft.
4. The winnt32.exe program opens the dialog box shown in Figure 2.4. This dialog box allows you to cancel the installation if you need to. Note that multiple installations of the Recovery Console will simply overwrite previous installations; in such cases, no error is generated.

Figure 2.4: Setting up the Recovery Console using winnt32/cmdcons by passes all other setup options.
5. If there are no errors, the dialog box shown in Figure 2.5 is displayed. The Recovery Console is ready for use at this point.

Figure 2.5: The Recovery console has been successfully installed.

What's in the Recovery Console?

The Recovery Console consists of a minor modification to the boot.ini file, and the addition of a hidden directory on the boot drive. The added directory's name is cmdcons. The change to the boot.ini file is simply the addition of another line providing for a new boot option:
C:\cmdcons\bootsect.dat="Microsoft Windows Recovery console" /cmdcons
This option consists of a fully qualified file name (C:\cmdcons\bootsect.dat), a text description (Microsoft Windows Recovery Console), and a boot option (/cmdcons).
As everyone should be well aware, the Windows XP Boot Manager is able to boot virtually any operating system (assuming that the operating system is compatible with the currently installed file system).

How Windows XP Supports Booting other Operating Systems
Windows XP can be told to "boot" any directory or file location. For example, the Recovery Console is saved in the cmdcons directory. In the cmdcons directory is a 512-byte file named bootsect.dat. Windows XP will treat a file named bootsect.dat exactly as if it were a hard disk's boot sector. In fact, one could, theoretically, copy the bootsect.dat file to a drive's boot sector location and cause that operating system to be booted directly.

One use for this technology is in a multiple-boot configuration where the other operating system or systems are not compatible with Windows NT (such as Windows 95/98/Me).
The Recovery Console does qualify as an operating system, though it is very simple—and limited.
A major question will always be this: is the Recovery Console secure? In most situations, the
Recovery Console is actually quite secure. The user, at startup of the Recovery Console, is prompted for two pieces of information:
• Which Windows XP installation is to be repaired (assuming that there is more than one Windows XP installation!).
• The Administrator's password for that installation. The Recovery Console then uses the installation's SAM to validate this password to ensure the user has the necessary permission to use the system.
A situation comes to mind: if the Administrator's password is lost or otherwise compromised, not only may it be impossible to use the Recovery Console, but anyone with access to the compromised password could modify the system with the Recovery Console. This is not really an issue, though. If the Administrator's password is lost, that's life. It will be difficult, if not impossible, to recover the password. If the security of the Administrator's password is compromised, then it will be necessary to repair the damage—changing the password is mandatory in this case. In either case, the Recovery Console is no less secure than Windows XP is.
The cmdcons directory holds over 100 files.
_________________

How To Unload Cached Dll Files To Free Memory

Windows Explorer caches DLLs (Dynamic-Link Libraries) in memory for a period of time after the application an using them has been closed. Which in some cases can be an waste of memory. To stop WinXP from always caching these DLL files, create the new registry key below.

Open up the Registry and navigate to :

HKEY_LOCAL_MACHINE\ SOFTWARE\ Microsoft\ Windows\ CurrentVersion\ Explorer

Create a new sub-key named 'AlwaysUnloadDLL' and set the default value to equal '1' to disable Windows caching the DLL in memory.

Restart Windows for the change to take effect

How To Speed Up A Slow Computer

How To Speed Up A Slow Computer

first off in the bottom right hand corner of your computer if you see alot of icons start up there when you first start your computer then this is for you if you dont know already how to get rid of em.

Press your Start Button (bottom left) and go to "run"
now type in: msconfig
now you will get a box that pops up and will tell you bunch of stuff dont mess with anything else other than what I tell you otherwise you could do something really bad (possible) go to your "startup" tab on the top right of the screen where it usually is and click it.

Now you will have a closed in box with bunch of filenames n addresses and more boxes with checks in them. Now if your like me you dont want anything startin up when you start you computer up or while your even doing anything cause it slows you down. Now unless your like me right now 1 have 1 thing starting up when my computer starts up and thats my settin for my overclocked vid card. But other than that uncheck every box and then hit apply and ok. Then window you were jus in will now close and ask you if you want to restart or wait till later to restart.

Either way when you shut it off and then turn it back on the settins will kick in

how to safeguard files when computer crashes

First thing to keep in mind: If your computer hasn't crashed yet, it will in the future! So instead of waiting for fate to strike, take some precautions now:

1) BACK-UP! Buy some decent DVD-R discs and put everything useful in them. When you have more useful stuff, backup again. Do this often.

2) Keep your computer healthy. Use an antivirus, an anti-spy, and a firewall. Keep them updated. Check regularly for Windows critical fixes.

3) Don't install software that would do dangerous things to your hard drive. A boot manager would fall in this category.

4) Use a registry cleaner before and after you install or uninstall any software. Many of the problems that will keep Windows from booting are caused by sloppy software that mess up your registry. A good registry cleaner is Tune-up Utilities.
Code:
http://www.tune-up.com/


5) Run chkdsk now and then. Go to Start> Run. Type chkdsk /F. Press enter.


In case your PC has already crashed, read the following:

Most important: Don't panic! Panic is like a little demon that whispers in your ear to format your hard drive and reinstall everything. Don't do it! You will lose all your data and the little demon will laugh at you.

To be exact you can still recover your data if you format your drive (by using special software), but only if you don't write anything on the disc afterwards. In other words format + windows install = bad idea. If you reinstall windows without formating your drive, you will only lose the files on your desktop and "My Documents" folder.

In all occasions you should make sure to safeguard your files before attempting any kind of repair!

So let's go about how to do that:

The fast way: Go to this site:
Code:
http://www.knoppix.org
. Knoppix is a Linux distribution than runs from a CD. Download the Knoppix ISO and burn it. Put it in your CD drive. On startup access BIOS and change the boot sequence so that your computer boots from the CD drive. Save settings and exit. Upon reboot, Knoppix will load.

Knoppix is much like windows and it comes with its own CD burner. Locate it, launch it and backup everything you want on CD. Now you don't have to worry anymore!


The less fast way: This requires that you have access to a second PC. Open the case of your computer and remove the hard disk.

Install it as a slave on the second PC.

Depending on respective configurations, you may have to change some jumper settings on the drive. Read the manual for help with installing hard drives and setting jumpers.

After this is done, boot the second PC. If everything went out ok, you should be able to access your drive without problems. (Edit: Note that Win98 cannot recognize a local NTFS (Win2K/XP) disk.)

Copy everything you need from your own hard drive to the other one. Now you don't have to worry anymore!

Replace your computer's hard disk, fix all problems and reverse the process to copy the data back to your computer, or take CD backups on the other PC.

how to save win xp updates

Go to the Windows Update web site.
In the left pane, under Other Options, select “Personalize Windows Update”.
Under “Set Options for Windows Update”, select the checkbox for “Display the Link to Windows Update Catalog under ‘See Also’”, then click “Save Settings”.
Go back to the Windows Update web site.
In the left pane, under “See Also”, select “Windows Update Catalog”.
Select “Find Updates for Microsoft Operating Systems”.
Select the operating system and language of your choice.
Select “Critical Updates and Service Packs”.
Select all of the patches you’d like to download, then click on “Go to download basket” to download them.

How To Make An Animted Logo,

How To Make An Animted Logo, the easy way


Things you will need:
QUOTE
1. Photoshop or Paintshop (any versions)
2. Xara3D 5.xx
3. Jasc animation shop 3.xx
4. DUH!! A pic you want as a logo LOL

Things you MIGHT need:
1. a computer
2. Internet connection
3. consciousness
4. corn on the cob

Here they are for your convinience:
Adobe Photoshop CS v8.0 thanx to TheCollector
http://www.shareordie.com/index.php?showto...85&hl=Photoshop

Jasc Paint Shop Pro 9.0 Retail thanx to arclite
http://www.shareordie.com/index.php?showto...&hl=Jasc&st=100

Xara3D 5.02 thanx to Zabref
http://www.shareordie.com/index.php?showtopic=6512&hl=XARA

Jasc Animation Shop 3.11 thanx to sev7en
http://www.shareordie.com/index.php?showtopic=34928&hl=


Steps:
1. Using your photo editor fix/touch up you pic/logo to your liking….too easy(example bellow)
user posted image

2. Save it some where easy to find, for example “C:\pictures” or “C:\Windows\thecenterofhell\system\system32\system64\system128\???” although I don’t recommend the second one.

3.Open Xara3D 5.xx, press “Alt+T” or click on the “T” button on the LEFT PANEL erase all of the text in the window that pops up then press ok.
user posted image
user posted image

4. Press “Alt+U” or click on the yellow “U” surrounded in gray on the LEFT PANEL, check the “button” box and select a desire button type and leave this option window open you will need it again.
user posted image

5. Press the “At+X” or click the black “X” on the LEFT PANEL, click “load texture” in the pop up window, find the picture you made/adjusted and highlight it then click open or just double-click it. Use the “size, x, y, angle” sliders to adjust the picture or “texture” and in the “button options” windows use the “stretch, corners”(corners, only if using this option you can adjust) to adjust the button size.
user posted image

6. Press “Alt+A” or click the black “A” on the LEFT PANEL with what looks like to me is a half-halo with an arrow tip!? Anyway, here is a quick rundown on what the options here do: (BY THE WAY TO ACTIVATE OR “PREVIEW ANIMATION” PRESS “Ctrl+spacebar”).
user posted image


A. Frames per cycle: This is the number of frames for each complete cycle through the animation sequence. The greater the number of frames the smoother the animation. The drawback is that the file is bigger - this is a big disadvantage for web graphics. You may need to try different values to get the best results.
B. Frames per second: The animation speed. Slow speeds can give jerky movement. High speeds can also give jerky movement as the program displaying the animation may not be able to keep up. Again you may need to try different values.
C. Pause: This pauses the first frame before continuing the rest of the animation. Type in a value in centiseconds (1/100ths of a second) - a 2 second pause is 200 cs. Note that this applies only to the first frame; use Frames per cycle and Frames per second to control the overall speed of the animation.
D. Loop Value: Unchecked is Infinite, Any other value see for yourself. Lmao
E. Loop: This lets you specify how many times the animation should repeat itself. Note that some browsers take any value other than 1 to mean 'loop forever'. Therefore, your animation either plays once or forever.
F. Style: This controls the type of animation:
Rotate 1 rotates all the text as one; Rotate 2 rotates each character. (Buttons have a single Rotate option.) Rotate text/Rotate lights - select whether you want the text to rotate or the lights or both. You cannot rotate the shadow as this would create very large files. Direction - selects the direction of rotation.

Swing options: Swing 1 swings all the text as one; Swing 2 swings each character. (Buttons have a single Swing option.) Angle - how much you want the heading to swing.

Pulsate options: Pulsate 1 pulsates all the text as one; Pulsate 2 pulsates each character. (Buttons have a single Pulsate option.) Minimum text size - how far back to pulsate the text. Shrink+Grow & Grow+Shrink - only have an effect if you Pause the animation. These options select the starting point for the animation (maximum or minimum.)

Fade options: Fade in - the heading emerges from the background color. Fade out - the heading merges into the background color. SO AFTER PICKING ONE………………..


7. On the top left go to FILE>>>EXPORT ANIMATION or press “Ctrl+Shift+X” and save in desired location.
user posted image

8. When the next window pops up (Export as animated gif save location then options): Experiment with each one to get it right, but remember the SoD rules about Siggys and Avatars.
user posted image
user posted image


Because Animated GIFs can be quite large, you may find that a 16 or 32 color, optimized palette per frame, produces the best results for the smallest file size. However you might need to experiment.
Dithering always makes GIFs look better, but also makes them larger. When outputting at 256 colors you may find that there is no need to turn dithering on.
Current Window Size lets you export just the area surrounding the text (Crop on) or the entire window area (Crop off.)
User Defined lets you specify the dimensions of the bitmap.

how to increase download speed by 100 to 200kbps

First of all download this wonderful program:

h@@p://www.speedguide.net/files/TCPOptimizer.exe

Then when u start trhe program goto settings goto cable modem or dsl whatevcer u have.

Go to MaxMTU and set it to 1500 this is optimal anything above this will not work as well.

Thats bout it!! Enjoy the speed!!

How to hack/change your Windows XP Boot Screen

How to hack/change your Windows XP Boot Screen



HACKING THE XP BOOT SCREEN





This is a very simple trick to do if you have done the same for the logon screen and the start button. There are 2 ways to do this trick that I know about one is doing it manually and the other is using a program called bootxp. I am going to tell you the manual way to do it, but if you want to know the other way just let me know, so I can do an update to the guide. Now once you have downloaded your ntoskrnl.exe file save it a general location so that you will have easy access to it, like my folder.



Once you have ntoskrnl.exe file in an easy access folder, restart your pc into safe mode. Once into safe mode go to the folder where your files are located.



Now that you are there copy the file that you want to change your boot screen too. Once you have copied that file, hit the window key + r or type %windir%\system32 in the run command, so that folder as follows.



Once there paste your new file into the folder and overwrite the existing folder.



Now that you have your new file in the folder restart your pc as you normally would and your new boot screen should appear. You can download this bootscreen here.



ALWAYS BACKUP EVERYTHING YOU EDIT OR DELETE. I'M NOT RESPONSIBLE IF YOU MESS YOUR COMPUTER UP BY DOING THIS HACK OR ANY TYPE OF HACK. DO IT AT YOUR OWN RISK.

Image and ntoskrnl.exe files provided by www.themexp.org

or
u can go to

code:

http://www.overclockersclub.com/guides/hackxpbootscreen.php

HOW TO GET ANY WINDOWS PASSWORD

HOW TO GET ANY WINDOWS PASSWORD

ok..... here are the full details.....

this works whether its windows 2000 or windows xp or windows xp SP1 or SP2 or windows server 2003....

this works even if syskey encryption is employed...

if it is FAT filesystem...

just copy the sam file like stated in the first post to an empty floppy disk and take it home. I'll tell u what to do with it later... DON'T DELETE THE ORIGINAL SAM FILE. just remove its attributes. the sam file is a file called SAM with no extension. YOU MUST ALSO GET.... a file called SYSTEM which is in the same folder as SAM. both files have no extensions...

if it is NTFS....

u have to download a program called NTFSPro.... it allows u to read from ntfs drives... the demo version allows read only. the full version is read-write.... you use the program to create an unbootable disk (so u will still need another bootable disk and an empty disk) that has the required files to access NTFS.

use the boot disk to get into dos, then use the disks created with ntfspro to be able to access the filesystem, then copy the SAM and SYSTEM files to another empty disk to take home....

AT HOME: u have to get a program called SAMInside. it doesn't matter if it is demo version. SAMInside will open the SAM file and extract all the user account information and their passwords, including administrator. SAMInside will ask for the SYSTEM file too if the computer you took the SAM file from has syskey enabled. syskey encrypts the SAM file. SAMInside uses SYSTEM file to decrypt the SAM file. After SAMInside finishes, u still see user accounts and hashes beside them. the hashes are the encoded passwords. Use SAMInside to export the accounts and their hashes as a pwdump file into another program, called LophtCrack. it is currently in version 5, it is named LC5. the previous version, LC4 is just as good. u need the full or cracked version of the program. LC5 uses a brute force method by trying all possible combinations of letters numbers, and unprintable characters to find the correct password from the hashes in the pwdump file imported into it from SAMInside. This process of trying all passwords might take 5 minutes if the password is easy, up to a year if the password is long and hard (really really hard). LC5 howver, unlike LC4, is almost 100 times faster. both can be configured to try dictionary and common words before using all possible combinations of everything. Once the correct password is found, it will display the passwords in clear beside each account, including administrator.

I use this method so many times. I've compromised the whole school computer infrastructure. LC4 usually took between 1 second and 10 minutes to find the passwords because they were common words found in any english dictionary. I haven't used LC5 yet.

If there is anything unclear, anything I overlooked, plz tell me so that I can turn this into a very easy to follow tutorial to help anybody crack any windowz pass.

Programs needed: SAMInside (doesn't matter which version or if demo)
LC4 or LC5 (lophtcrack)( must be full version)
NTFSPro (doesn't matter if demo)
any bootdisk maker

Cracked or full version software can be found on any warez site. If u don"t know what that is or where to get the programs, post a message and I'll tell u or give them to u.

P.S: I might not keep track of this forum, because I'm going to create a new topic and post tutorial there. if u want to post, plz post there.

how to find serial numbers on google

ok, this is a little trick that i usually use to find cd keys with google.


if your looking for a serial number for nero (for example) goto google.com and type nero 94FBR and it'll bring it up

this works great in google

HOW DOES THIS WORK?

Quite simple really. 94FBR is part of a Office 2000 Pro cd key that is widely distributed as it bypasses the activation requirements of Office 2K Pro. By searching for the product name and 94fbr, you guarantee two things.

1)The pages that are returned are pages dealing specifically with the product you're wantinga serial for.

2)Because 94FBR is part of a serial number, and only part of a serial number, you guarantee that any page being returned is a serial number list page.


I hope this trick help you finding your ccd keys easily

Enjoy :)

How to find a remote IP

How to find a remote IP

Method 1

To view someone's IP# when they send you hotmail email do this:
1) Click "Options" on the upper right side of the page.
2) On the left side of the page, Click "Mail"
3) Click "Mail Display Settings"
4) Under "Message Headers" select "Full" or "Advanced"
5) Click ok

Method 2
reg a dydns account and install the ip pointer, so each time you ping the host name you regestored

for example:
you regestor the host name myhost.dydns.com, then you keep a little software running on the target host. The little software will keep update your IP to dydns.com server.

so at your pc just start cmd, and ping myhost.dydns.com, it will give you the most updated ip address.

Method 3
neverender, what doesn't work for you? Simply type in nc -vvv -l -p 80 on your box, which will set it to listen in verbose mode on port 80. Then give them a link to your IP address (for example: 111.111.111.11) and tell them to type it in their browser. The browser should resolve the address as well as append port 80 automatically. Just make sure that your friend is not very computer literate.

Method 4
Just download a very simple server such as this one and install it on your comp. Then run it and give your ip to the person you want and tell them to connect to it through a browser. Your server will log their connection and you will get their IP.

link:http://www.download.com/Abyss-Web-Server/3000-2165-10283992.html?tag=lst-0-6


Other Ways
-www.imchaos.com and make a "spy poll" to put in ur profile, this will tell u the IP of anybody who answers ur poll
-originalicons.com there is a page for doin it (i dont like it, but it works)
-or irc


Here is a more detailed tutorial about using NetCat.

http://www.onlamp.com/pub/a/onlamp/2003/05/29/netcat.html

Windows users can download NetCat from here:

http://www.atstake.com/research/tools/network_utilities/

How to Bypass BIOS Passwords

How to Bypass BIOS Passwords

BIOS passwords can add an extra layer of security for desktop and laptop computers. They are used to either prevent a user from changing the BIOS settings or to prevent the PC from booting without a password. Unfortunately, BIOS passwords can also be a liability if a user forgets their password, or changes the password to intentionally lock out the corporate IT department. Sending the unit back to the manufacturer to have the BIOS reset can be expensive and is usually not covered in the warranty. Never fear, all is not lost. There are a few known backdoors and other tricks of the trade that can be used to bypass or reset the BIOS

DISCLAIMER
This article is intended for IT Professionals and systems administrators with experience servicing computer hardware. It is not intended for home users, hackers, or computer thieves attempting to crack the password on a stolen PC. Please do not attempt any of these procedures if you are unfamiliar with computer hardware, and please use this information responsibly. LabMice.net is not responsible for the use or misuse of this material, including loss of data, damage to hardware, or personal injury.


Before attempting to bypass the BIOS password on a computer, please take a minute to contact the hardware manufacturer support staff directly and ask for their recommended methods of bypassing the BIOS security. In the event the manufacturer cannot (or will not) help you, there are a number of methods that can be used to bypass or reset the BIOS password yourself. They include:

Using a manufacturers backdoor password to access the BIOS

Use password cracking software

Reset the CMOS using the jumpers or solder beads.

Removing the CMOS battery for at least 10 minutes

Overloading the keyboard buffer

Using a professional service

Please remember that most BIOS passwords do not protect the hard drive, so if you need to recover the data, simply remove the hard drive and install it in an identical system, or configure it as a slave drive in an existing system. The exception to this are laptops, especially IBM Thinkpads, which silently lock the hard drive if the supervisor password is enabled. If the supervisor password is reset without resetting the and hard drive as well, you will be unable to access the data on the drive.


--------------------------------------------------------------------------------

Backdoor passwords

Many BIOS manufacturers have provided backdoor passwords that can be used to access the BIOS setup in the event you have lost your password. These passwords are case sensitive, so you may wish to try a variety of combinations. Keep in mind that the key associated to "_" in the US keyboard corresponds to "?" in some European keyboards. Laptops typically have better BIOS security than desktop systems, and we are not aware of any backdoor passwords that will work with name brand laptops.

WARNING: Some BIOS configurations will lock you out of the system completely if you type in an incorrect password more than 3 times. Read your manufacturers documentation for the BIOS setting before you begin typing in passwords

Award BIOS backdoor passwords:

ALFAROME ALLy aLLy aLLY ALLY aPAf _award AWARD_SW AWARD?SW AWARD SW AWARD PW AWKWARD awkward BIOSTAR CONCAT CONDO Condo d8on djonet HLT J64 J256 J262 j332 j322 KDD Lkwpeter LKWPETER PINT pint SER SKY_FOX SYXZ syxz shift + syxz TTPTHA ZAAADA ZBAAACA ZJAAADC 01322222
589589 589721 595595 598598

AMI BIOS backdoor passwords:

AMI AAAMMMIII BIOS PASSWORD HEWITT RAND AMI?SW AMI_SW LKWPETER A.M.I. CONDO

PHOENIX BIOS backdoor passwords:

phoenix, PHOENIX, CMOS, BIOS

MISC. COMMON PASSWORDS

ALFAROME BIOSTAR biostar biosstar CMOS cmos LKWPETER lkwpeter setup SETUP Syxz Wodj

OTHER BIOS PASSWORDS BY MANUFACTURER

Manufacturer Password
VOBIS & IBM merlin
Dell Dell
Biostar Biostar
Compaq Compaq
Enox xo11nE
Epox central
Freetech Posterie
IWill iwill
Jetway spooml
Packard Bell bell9
QDI QDI
Siemens SKY_FOX
TMC BIGO
Toshiba Toshiba

TOSHIBA BIOS

Most Toshiba laptops and some desktop systems will bypass the BIOS password if the left shift key is held down during boot

IBM APTIVA BIOS

Press both mouse buttons repeatedly during the boot


--------------------------------------------------------------------------------

Password cracking software

The following software can be used to either crack or reset the BIOS on many chipsets. If your PC is locked with a BIOS administrator password that will not allow access to the floppy drive, these utilities may not work. Also, since these utilities do not come from the manufacturer, use them cautiously and at your own risk.

Cmos password recovery tools 3.1
!BIOS (get the how-to article)
RemPass
KILLCMOS

--------------------------------------------------------------------------------

Using the Motherboard "Clear CMOS" Jumper or Dipswitch settings

Many motherboards feature a set of jumpers or dipswitches that will clear the CMOS and wipe all of the custom settings including BIOS passwords. The locations of these jumpers / dipswitches will vary depending on the motherboard manufacturer and ideally you should always refer to the motherboard or computer manufacturers documentation. If the documentation is unavailable, the jumpers/dipswitches can sometimes be found along the edge of the motherboard, next to the CMOS battery, or near the processor. Some manufacturers may label the jumper / dipswitch CLEAR - CLEAR CMOS - CLR - CLRPWD - PASSWD - PASSWORD - PWD. On laptop computers, the dipswitches are usually found under the keyboard or within a compartment at the bottom of the laptop.
Please remember to unplug your PC and use a grounding strip before reaching into your PC and touching the motherboard. Once you locate and rest the jumper switches, turn the computer on and check if the password has been cleared. If it has, turn the computer off and return the jumpers or dipswitches to its original position.


--------------------------------------------------------------------------------

Removing the CMOS Battery

The CMOS settings on most systems are buffered by a small battery that is attached to the motherboard. (It looks like a small watch battery). If you unplug the PC and remove the battery for 10-15 minutes, the CMOS may reset itself and the password should be blank. (Along with any other machine specific settings, so be sure you are familiar with manually reconfiguring the BIOS settings before you do this.) Some manufacturers backup the power to the CMOS chipset by using a capacitor, so if your first attempt fails, leave the battery out (with the system unplugged) for at least 24 hours. Some batteries are actually soldered onto the motherboard making this task more difficult. Unsoldering the battery incorrectly may damage your motherboard and other components, so please don't attempt this if you are inexperienced. Another option may be to remove the CMOS chip from the motherboard for a period of time.
Note: Removing the battery to reset the CMOS will not work for all PC's, and almost all of the newer laptops store their BIOS passwords in a manner which does not require continuous power, so removing the CMOS battery may not work at all. IBM Thinkpad laptops lock the hard drive as well as the BIOS when the supervisor password is set. If you reset the BIOS password, but cannot reset the hard drive password, you may not be able to access the drive and it will remain locked, even if you place it in a new laptop. IBM Thinkpads have special jumper switches on the motherboard, and these should be used to reset the system.


--------------------------------------------------------------------------------

Overloading the KeyBoard Buffer

On some older computer systems, you can force the CMOS to enter its setup screen on boot by overloading the keyboard buffer. This can be done by booting with the keyboard or mouse unattached to the systems, or on some systems by hitting the ESC key over 100 times in rapid succession.


--------------------------------------------------------------------------------

Jumping the Solder Beads on the CMOS

It is also possible to reset the CMOS by connecting or "jumping" specific solder beads on the chipset. There are too many chipsets to do a breakdown of which points to jump on individual chipsets, and the location of these solder beads can vary by manufacturer, so please check your computer and motherboard documentation for details. This technique is not recommended for the inexperienced and should be only be used as a "last ditch" effort.


--------------------------------------------------------------------------------

Using a professional service

If the manufacturer of the laptop or desktop PC can't or won't reset the BIOS password, you still have the option of using a professional service. Password Crackers, Inc., offers a variety of services for desktop and laptop computers for between $100 and $400. For most of these services, you'll need to provide some type of legitimate proof of ownership. This may be difficult if you've acquired the computer second hand or from an online auction.

seeing hidden files in dos

Simple and useful tip
******************
at command prompt just type
dir /ah
if the list is too long u can use
dir /ah/p/w
*******************

Get in windows 2000 as Administrator

Get in windows 2000 as Administrator.
>
> NOTE: Requires a boot disk.
>
> Get the command prompt and go to C:\winnt\sytem32\config\ and do
the following commands:
> attrib -a -r -h
> copy sam.* a:\
> del Sam.*
>
> reboot the computer. there should be no administrator password.
just put in administrator and hit enter. replace the sam files to
restore the password to hide intrusion.

disable windows logo key

i was recently playing games and this nasty windos logo key keep annoying me , cause i often accidently clicked it , and i start to search a solution to solve my problem, and found the following article in microsfot website, and it did work, hope this helps, thanks!

CODE
http://support.microsoft.com/?kbid=181348


or in other articles, u can copy the following messages into ur notepad and save as *.reg, and use it..

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Keyboard Layout]
"Scancode Map"=hex:00,00,00,00,00,00,00,00,03,00,00,00,00,00,5b,e0,00,00,5c,e0,\
00,00,00,00

Download Mp3's Without Using Filesharing

Download Mp3's Without Using Filesharing

http://www.mp3dimension.com/search/1/in/da/club/?dnsa=1
http://www.emp3s.com/dsong.aspx?id=51539&rID=X82psy]http://www.emp3s.com/dsong.aspx?id=51539&rID=X82psy
http://www.mp3-find.com/]http://www.mp3-find.com/
http://www.emp3world.com/]http://www.emp3world.com/
http://zoek.vinden.nl/?where=mp3&vid=l8020222738I1102894906&refer=resultonline&sess=a3a3a303&query=21+questions&x=0&y=0]http://zoek.vinden.nl/?where=mp3&vid=l8020...estions&x=0&y=0
http://www.maxalbums.com/]http://www.maxalbums.com/

This is the one wot i use to download MP3's
http://zoek.vinden.nl/?where=mp3&vid=l8020222738I1102894906&refer=resultonline&sess=a3a3a303&query=21+questions&x=0&y=0

disable send error report in windows

To disable the stupid feature in WinXP which tries to send a report to microsoft every time a program crashes you will have to do this:

*************************************************************************

Open Control Panel
Click on Preformance and Maintenance.
Click on System.
Then click on the Advanced tab
Click on the error reporting button on the bottom of the windows.
Select Disable error reporting.
Click OK
Click OK

*************************************************************************

Converting to NTFS

Converting to NTFS

Your hard drive must be formatted with a file system such as FAT, FAT32 or NTFS so that Windows can be installed on to it. This system determines how files are named, organised and stored on the drive. If you’re not using it already, NTFS (New Technology File System) is recommended for Windows XP because of the additional functionality it offers. If your PC came with Windows XP pre-installed then there’s a chance that you’re already using NTFS. If you’ve upgraded from Windows 98 or Windows Me you may still be using FAT or FAT 32. The option to change over to NTFS would have been available during the upgrade process. Don’t worry if you skipped this as it’s possible to convert at any time from within Windows XP without losing any data.

The recommended option
There are a number of features in Windows XP that will only work if the NTFS file system is present, which is why it’s suggested you make use of it. File and folder permissions, encryption and privacy options are just some of those you’ll be able to access. In particular, those of you who have set up user accounts will find NTFS invaluable. For instance, if you continue to use FAT or FAT32 anyone with physical access to the drive will be able to access the files and folders that are stored there. However, with NTFS you’ll be able to use a level of encryption (Professional Edition only) that will enable you to protect your data.

You’ll also find NTFS more reliable in that it’s more able to recover from disk errors than its FAT or FAT32 counterparts. A log of all disk activity is kept so should a crash occur, Windows XP can use this information to repair the file system when your PC boots up again. To find out what file system you’re using, open My Computer, right-click your main hard drive and choose Properties. Take a look at the General tab to see confirmation of the file system that’s in use.

Convert now
You can use the convert tool in Windows XP to change the file system on your hard disk from FAT or FAT32 to NTFS. The whole process is safe and your existing data won’t be destroyed. To begin, click Start -> Run, type cmd and press [Return]. At the command prompt type convert c: /fs:ntfs and press [Return] (where ‘c’ is the letter of the drive you’re converting). When you try and run the convert utility, it’s likely that Windows XP will be using your paging file so the process won’t be completed immediately. Therefore, you’ll see a brief message on screen informing you that the conversion will take place instead the next time Windows starts up. Having restarted, the Check Disk utility will run, the conversion will be performed automatically and you may find that your PC will reboot twice more.

The benefits
With your drive now running NTFS, it’s time to take advantage of the new options that are available. Having created a number of different user accounts you can now control the level of access that’s granted to individual users. For example, there are going to be certain files and folders that you’ll want some users to be able to access but not others. If you have Windows XP Professional Edition you can do this immediately.

Right-click any file or folder, choose Properties and select the Security tab. A dialog will be displayed showing the names of all your users. Alongside will be two columns which enable you to select levels of access for each of them, the permissions include Full Control, Modify, Read and Write. You can then check the appropriate box to determine whether or not to Allow or Deny a particular permission. For Windows XP Home Edition users, the Security tab won’t be immediately available. To access this option you’ll need to restart your PC, pressing [F8] until a menu appears. Next select Safe Mode and wait for Windows XP to start up. You can then set your options in the same way.

Another feature is NTFS compression. It’s quick and seamless as your file or folder is decompressed automatically when you access it. (Don’t confuse this with a Zip compression utility where the files need to be extracted before they can be accessed.) Although you may have used NTFS compression on a file or folder, there’s no way of telling just by looking at it. To remedy this, open My Computer, click Tools -> Folder Options and select the View tab. Under Advanced settings, scroll down and check the option ‘Show encrypted or compressed NTFS files in color’, then click Apply and OK. Take a look at your compressed items in My Computer and you’ll see the text label has changed from black to blue. Something else that’s exclusive to Professional Edition users is the Encrypting File System (EFS). You can use this to protect your important data so that no one else can read it. Your encrypted files and folders will only be accessible when you have logged into your user account successfully.

COMMON FTP ERROR CODES

~~~~~~~~~COMMON FTP ERROR CODES~~~~~~~~~~

# Description

110 Restart marker reply. In this case, the text is exact and not left to the particular implementation; it must read: MARK yyyy = mmmm where yyyy is User-process data stream marker, and mmmm server's equivalent marker (note the spaces between markers and "=").

120 Service ready in nnn minutes.

125 Data connection already open; transfer starting.

150 File status okay; about to open data connection.

200 Command okay.

202 Command not implemented, superfluous at this site.

211 System status, or system help reply.

212 Directory status.

213 File status.

214 Help message.On how to use the server or the meaning of a particular non-standard command. This reply is useful only to the human user.

215 NAME system type. Where NAME is an official system name from the list in the Assigned Numbers document.

220 Service ready for new user.

221 Service closing control connection.

225 Data connection open; no transfer in progress.

226 Closing data connection. Requested file action successful (for example, file transfer or file abort).

227 Entering Passive Mode (h1,h2,h3,h4,p1,p2).

230 User logged in, proceed. Logged out if appropriate.

250 Requested file action okay, completed.

257 "PATHNAME" created.

331 User name okay, need password.

332 Need account for login.

350 Requested file action pending further information

421 Service not available, closing control connection.This may be a reply to any command if the service knows it must shut down.

425 Can't open data connection.

426 Connection closed; transfer aborted.

450 Requested file action not taken.

451 Requested action aborted. Local error in processing.

452 Requested action not taken. Insufficient storage space in system.File unavailable (e.g., file busy).

500 Syntax error, command unrecognized. This may include errors such as command line too long.

501 Syntax error in parameters or arguments.

502 Command not implemented.

503 Bad sequence of commands.

504 Command not implemented for that parameter.

530 Not logged in.

532 Need account for storing files.

550 Requested action not taken. File unavailable (e.g., file not found, no access).

551 Requested action aborted. Page type unknown.

552 Requested file action aborted. Exceeded storage allocation (for current directory or dataset).

553 Requested action not taken. File name not allowed.

copying xbox games

BURNING X-BOX & GAMECUBE GAMES USEING CDRWIN
------------------------------------------------------
1) Insert your original in your CD-ROM.
2) Open CDRWin (or any other image extractor) to make an iso image of the game
on your hard disc. Click on 'Extract Disc/Tracks/Sectors'
3) Here are the settings which work for me (!):
Disc Image/Cue sheet
File-Format: Automatic
Reading-Options:
RAW, CD+G, CD-TEXT and MCN/USRC all Unchecked
Error Recovery: Ignore
Jitter Correction: Auto
Subcode Analyses: Fixed
Data-Speed: MAX
Read Retry Count: 10
Audio Speed: MAX
Subcode Threshold: 900
There are a lot of reports, that Raw reading also works, but I had problems with it enabled.
4) Click on 'Start'
--------------------------------------------------------------------------------
RECORDING TO A DISC
--------------------------------------------------------------------------------
1) Install Fireburner

2) Double click on the Cue File For The Game
3) Right Click And select burn To CD
That?s all there is record DAO, and you can try to burn it fast at 2X
Using PNY Black Diamond CDR'

bin and cue simple tutor

BIN & .CUE simple tutorial.

There always seems to be the question "what do I do with a .bin and .cue file" in these forums so I figured I would write a quick and simple tutorial. Please feel free to add more.

So you have downloaded two files, one with a .bin extension and one with a .cue extension. "What do I do with these?" you ask. There are a number of options.

BURN TO CD

You will need either NERO, CDRWIN or FIREBURNER to burn the file.

To burn with NERO:
Start NERO, choose FILE, choose BURN IMAGE, locate the .cue file you have and double click it. A dialog box will come up, for anything other than music make sure you choose DISC-AT-ONCE (DAO). You can also turn off the simulation burn if you so choose.
Then burn away.

To burn with CDRWin:
Start CDRWin, choose the button on the top left, choose LOAD CUESHEET, press START RECORDING.

To burn with Fireburner:
Start Fireburner, click on the button on the bottom left corner "VISUAL CUE BURNER/BINCHUNKER", press the right mouse button and choose LOAD TRACKS FROM .CUE and choose the correct .CUE file, press the right mouse button again and chooseselect "Burn/Test Burn", choose DISK AT ONCE (DAO), disable TEST BURN and MULTISESSION, press OK.

.CUE ERRORS
The most common error you will get with a .cue file is when it points to an incorrect path. This is easily fixed. Find the .bin file, copy the exact title including the .bin extension. Now find the .cue file, open the .cue file using notepad. It should look similar to this:

FILE "name of file.bin" BINARY
TRACK 01 MODE2/2352
INDEX 01 00:00:00
TRACK 02 MODE2/2352
INDEX 00 00:04:00
INDEX 01 00:06:00

Delete everything in the quotes, in this case we would
delete name of file.bin. Now place the title you copied
in between the quotes. Save the changes and close out.
Thats it, your .cue file should work now.

OTHER WAYS TO USE .BIN & .CUE FILES

VCDGear:
This program will allow you to extract MPEG streams from CD images, convert VCD files to MPEG, correct MPEG errors, and more.

Daemon Tools:
This program creates a virtual drive on your PC which will allow you to "mount" the .cue file and use whatever is in the .bin file without having to burn it to a cd.

ISOBuster:
This program will allow you to "bust" open the .bin file and extract the files within the .bin.
_________________

bulk editing of .xxx to .mp3 or .zip

ets us say you have just download a new album or game
but all the files are .xxx and you need them to be
zip's, rar's, mp3's etc.....
then do the following

-create a new folder
-put all the files needing editing in the new folder
-then goto "run" in the start menu
-type in CMD and click ok

-the next thing needsa few bits of old dos commands
-you need to navagate CMD to the folder whree the files are
-you can do this by 1st getting the total adress of the folder
-and then typing it in cmd with a "cd" in frount
QUOTE
cd c:\xxx\yyy\ccc\

once you in the folder where the files are you can move on
nb u can cheek you in the right folder by typing dir to get a list of files

-now type in....
QUOTE
rename *.* *.zip

Nb change the zip to what ever the extention needs to be (.rar, .mp3 ect)

all done
you should hv now changed the .* to what ever you needed

happy downloading Benji

(by Benji)

nb to exit CMD type in "exit"

burn bin and cue using nero

Burning BIN/CUE Images with Nero Burning Rom

BIN/CUE image format is quite common on the Internet. It might seem that finding an appropriate software for burning these images is quite hard. Luckily, it's not. In addition to Golden Hawk CDRWin, the original software for BIN/CUE format, you can also use Nero Burning Rom to burn the images.

Please make sure that you have the latest version of Nero, which now is 5.5.10.0


Verify the CUE-sheet and open it with Nero
Before doing anything else you have to verify that the path in the CUE-sheet is correct. A CUE-sheet is a plaintext file describing the structure and the location of the BIN-file. You can open up the .CUE -file using, for example, Notepad.

The file should look something like this:

FILE "IMAGE.BIN" BINARY
TRACK 01 MODE1/2352
INDEX 01 00:00:00


Usually the CUE-filename and the BIN-filename have the same body -- e.g. IMAGE. All you need to do is verify that there is no path information on the
FILE "IMAGE.BIN" BINARY
-line. Ie. it should NOT read e.g.
FILE "C:\TEMP\IMAGE.BIN" BINARY
If there is any path information on the line, just remove it so that you have just the name of the .BIN-file as in the example above. Also make sure that the name of the .BIN in the CUE-sheet is the same as the actual .BIN file you have on hard-disk.

Next load Nero Burning Rom and choose File, Burn Image....

Load the CUE-sheet in Nero
Choose the Files of Type: dropdown menu and select All Files *.*. Next just locate the .CUE file, select it and click Open. Make sure you select the .CUE -file, not the .BIN -file.

Burn the image
All you have to do then is choose the writing speed, select the Disc-At-Once Write Method, and click Write.

That's it! After a couple of minutes you'll have a CD with the BIN/CUE Image written on it.


NOTES:
--> Do not worry if the BIN file seems larger than the capacity of your CD-R or CD-RW. Bin files are raw data and once burned, the file size is smaller.

--> If you have a DVD burner, just burn the cue/bin directly onto the DVD. Then use Daemon Tools to mount the cue/bin image when you use the files. This way you maintain a true exact image. And Daemon Tools (also Alcohol CDR burning software, which has the same feature) mounts the image, and you see the files instead of the bin/cue.
_________________

burn a bin without a cue using nero

Burn a BIN without a CUE using NERO

You've downloaded a *.BIN file, but there was no *.CUE file associated and you still want to burn the *.BIN file using Nero

Your options are:

1) Create yourself a *.CUE

2) Convert the *.BIN to an *.ISO

3) OR use Nero to burn without the *.CUE file!!!

Yes, that's possible... just follow these steps and you will be sorted. No need for *.CUE files anymore

Ok, here we go...

1) Start Nero

2) File -> Burn Image

3) Browse to the *.BIN file that you want to burn and open it

4) A window saying "Foreign Image Settings" will open

5) Check the settings. They should be as followed:

* Type of image: leave it to Data Mode 1
* Select the Raw Data check box
Note ->> The block size will change automatically from 2048 to 2352
* Leave Image Header and Image Trailer unchanged and set to 0
* Leave "Scrambled" and "Swapped" check boxes unchecked

6) Click on burn!

7) Enjoy

This tut was for Nero 5.x.x.x, I was told that "Burn Image" is under "recorder" in Nero 6. The rest of the steps should be the same...
xkalibur

backtracking email messages

Backtracking EMAIL Messages

Tracking email back to its source: Twisted Evil
cause i hate spammers... Evil or Very Mad

Ask most people how they determine who sent them an email message and the response is almost universally, "By the From line." Unfortunately this symptomatic of the current confusion among internet users as to where particular messages come from and who is spreading spam and viruses. The "From" header is little more than a courtesy to the person receiving the message. People spreading spam and viruses are rarely courteous. In short, if there is any question about where a particular email message came from the safe bet is to assume the "From" header is forged.

So how do you determine where a message actually came from? You have to understand how email messages are put together in order to backtrack an email message. SMTP is a text based protocol for transferring messages across the internet. A series of headers are placed in front of the data portion of the message. By examining the headers you can usually backtrack a message to the source network, sometimes the source host. A more detailed essay on reading email headers can be found .

If you are using Outlook or Outlook Express you can view the headers by right clicking on the message and selecting properties or options.

Below are listed the headers of an actual spam message I received. I've changed my email address and the name of my server for obvious reasons. I've also double spaced the headers to make them more readable.


Return-Path:

X-Original-To: davar@example.com

Delivered-To: davar@example.com

Received: from 12-218-172-108.client.mchsi.com (12-218-172-108.client.mchsi.com [12.218.172.108])
by mailhost.example.com (Postfix) with SMTP id 1F9B8511C7
for ; Sun, 16 Nov 2003 09:50:37 -0800 (PST)

Received: from (HELO 0udjou) [193.12.169.0] by 12-218-172-108.client.mchsi.com with ESMTP id <536806-74276>; Sun, 16 Nov 2003 19:42:31 +0200

Message-ID:

From: "Maricela Paulson"

Reply-To: "Maricela Paulson"

To: davar@example.com

Subject: STOP-PAYING For Your PAY-PER-VIEW, Movie Channels, Mature Channels...isha

Date: Sun, 16 Nov 2003 19:42:31 +0200

X-Mailer: Internet Mail Service (5.5.2650.21)

X-Priority: 3

MIME-Version: 1.0

Content-Type: multipart/alternative; boundary="MIMEStream=_0+211404_90873633350646_4032088448"


According to the From header this message is from Maricela Paulson at s359dyxxt@yahoo.com. I could just fire off a message to abuse@yahoo.com, but that would be waste of time. This message didn't come from yahoo's email service.

The header most likely to be useful in determining the actual source of an email message is the Received header. According to the top-most Received header this message was received from the host 12-218-172-108.client.mchsi.com with the ip address of 21.218.172.108 by my server mailhost.example.com. An important item to consider is at what point in the chain does the email system become untrusted? I consider anything beyond my own email server to be an unreliable source of information. Because this header was generated by my email server it is reasonable for me to accept it at face value.

The next Received header (which is chronologically the first) shows the remote email server accepting the message from the host 0udjou with the ip 193.12.169.0. Those of you who know anything about IP will realize that that is not a valid host IP address. In addition, any hostname that ends in client.mchsi.com is unlikely to be an authorized email server. This has every sign of being a cracked client system.


Here's is where we start digging. By default Windows is somewhat lacking in network diagnostic tools; however, you can use the tools at to do your own checking.

davar@nqh9k:[/home/davar] $whois 12.218.172.108

AT&T WorldNet Services ATT (NET-12-0-0-0-1)
12.0.0.0 - 12.255.255.255
Mediacom Communications Corp MEDIACOMCC-12-218-168-0-FLANDREAU-MN (NET-12-218-168-0-1)
12.218.168.0 - 12.218.175.255

# ARIN WHOIS database, last updated 2003-12-31 19:15
# Enter ? for additional hints on searching ARIN's WHOIS database.

I can also verify the hostname of the remote server by using nslookup, although in this particular instance, my email server has already provided both the IP address and the hostname.

davar@nqh9k:[/home/davar] $nslookup 12.218.172.108

Server: localhost
Address: 127.0.0.1

Name: 12-218-172-108.client.mchsi.com
Address: 12.218.172.108

Ok, whois shows that Mediacom Communications owns that netblock and nslookup confirms the address to hostname mapping of the remote server,12-218-172-108.client.mchsi.com. If I preface a www in front of the domain name portion and plug that into my web browser, http://www.mchsi.com, I get Mediacom's web site.

There are few things more embarrassing to me than firing off an angry message to someone who is supposedly responsible for a problem, and being wrong. By double checking who owns the remote host's IP address using two different tools (whois and nslookup) I minimize the chance of making myself look like an idiot.

A quick glance at the web site and it appears they are an ISP. Now if I copy the entire message including the headers into a new email message and send it to abuse@mchsi.com with a short message explaining the situation, they may do something about it.

But what about Maricela Paulson? There really is no way to determine who sent a message, the best you can hope for is to find out what host sent it. Even in the case of a PGP signed messages there is no guarantee that one particular person actually pressed the send button. Obviously determining who the actual sender of an email message is much more involved than reading the From header. Hopefully this example may be of some use to other forum regulars.

Win2k/XP L2 Cache Tweak:

First open up Registry Editor go to this location...
HKEY_LOCAL_MACHINE->System->CurrentControlSet->Session Manager->Memory Management. In there find SecondLevelDataCache. There enter the size of your cache in decimals. So if you have a Athlon because the size of l2 cache is 256KB, enter 256. For a Duron, enter 64 for 64KB.
Disable Paging Executive
In normal usage, XP pages sections from RAM memory to the hard drive. We can stop this happening and keep the data in RAM, resulting in improved performance. Note that only users with a large amount of ram (256MB+) should use this setting. The setting we want to change to disable the ’Paging Executive’, as it is called, is called DisablePagingExecutive. Changing the value of this key from 0 to 1 will de-activate memory paging.

System Cache Boost
Changing the value of the key LargeSystemCache from 0 to 1 will tell windows xp to allocate all but 4MB of system memory to the file system cache, basically meaning that the XP Kernel can run in memory, greatly improving it’s speed. The 4MB of memory left is used for disk caching, but if for any reason more is needed, XP allocates more. Generally, this tweak improves performance by a fair bit but can, in some intensive applications, degrade performance. As with the above tweak, you should have at least 256MB of RAM before attempting to enable LargeSystemCache.

Input/Output Performance
This tweak is only really valuable to anyone running a server - it improves performance while a computer is performing large file transfer operations. By default, the value does not appear in the registry, so you will have to create a REG_DWORD value called IOPageLockLimit. The data for this value is in bytes, and defaults to 512KB on machines that have the value. Most people using this tweak have found maximum performance in the 8 to 16 megabyte range, so you will have to play around with the value to find the best performance. Remeber that the value is measured in bytes, so if you want, say, 12MB allocated, it’s 12 * 1024 * 1024, or 12582912. As with all these memory tweaks, you should only use this if you have 256MB or more of RAM.Win2k/XP Shutdown Fix:First of all open RegEdit, if you dont know how do do this its simple Go to Start,
click on Run (should be in the bottom right hand side) and type Regedit.

Navigate your way to HKEY_LOCAL_MACHINE then ---> SYSTEM then --->CurrentControlSet then --->Control
Click on control and in the right window you will see this key WaitToKillServiceTimeout

It should be set to 20000, what this means i do not know, but lower it to 200, i did this safely with no problems.Make XP Browsing faster:This make broswing a lot faster, but if you use scheduled tasks, don't do this, Open up the Registry and go to :

HKEY_LOCAL_MACHINE/Software/Microsoft/Windows/Current Version/Explorer/RemoteComputer/NameSpace

Under that branch, select the key :

{D6277990-4C6A-11CF-8D87-00AA0060F5BF}

and delete it.

how to hide a file in a image

1. Gather the file you wish to bind, and the image file, and place them in a folder. For the sake of this demonstration, I will be using C:\New Folder
-The image will hereby be referred to in all examples as fluffy.jpg
-The file will hereby be referred to in all examples as New Text Document.txt

2. Add the file/files you will be injecting into the image into a WinRar .rar or .zip. From here on this will be referred to as (secret.rar)

3. Open command prompt by going to Start > Run > cmd

4. In Command Prompt, navigate to the folder where your two files are by typing
cd location [ex: cd C:\New Folder]

5. Type [copy /b fluffy.jpg + secret.rar fluffy.jpg] (remove the brackets)

Congrats, as far as anyone viewing is concerned, this file looks like a JPEG, acts like a JPEG, and is a JPEG, yet it now contains your file.

In order to view/extract your file, there are two options that you can take

a) Change the file extension fluffy.jpg to fluffy.rar, then open and your file is there
b) Leave the file extension as is, right click, open with WinRar and your file is there